Automotive Environmental Simulation Equipment supplier- SATAKE

Suzhou Satake Engineering Co., Ltd., founded in 2017, is a Sino-Japanese joint venture specializing in the design and construction of environmental test chambers, wind tunnels, and thermal testing equipment.

Located in the Changshu High-Tech Industrial Development Zone in Suzhou, SSEC also houses a technology R&D center in Shanghai. SSEC committed to quality management and environmental responsibility, holds ISO 9001 and ISO 14001 certifications.



评论

发表评论

此博客中的热门博文

Environmental Test Chambers Selection Guide: How to Choose the Right Chamber for Your Application

图片
 To choose the right environmental test chamber, I recommend starting with the test profile rather than the chamber size or price. Define the required temperature and humidity range, sample dimensions, test standard, load characteristics, measurement accuracy, and operating schedule before comparing models. For example, a chamber designed for temperature cycling may not be suitable for high-humidity condensation testing, while a chamber selected only by internal volume may struggle with product heat load or airflow requirements. The correct choice is the chamber that can reproduce your required environment consistently, safely, and economically. ​ In this guide, I explain how I evaluate environmental test chambers for electronics, automotive components, batteries, materials, packaging, and other industrial products. I also cover chamber types, application matching, specifications, supplier support, purchasing considerations, and common selection mistakes. The goal is to help you pr...
阅读全文

Advanced Control Systems for Repeatable Temperature and Humidity Testing

Advanced Control Systems for Repeatable Temperature and Humidity Testing Advanced control systems for repeatable temperature and humidity testing are closed-loop regulation architectures — sensor, controller, actuator and chamber thermodynamics treated as one system — that hold a setpoint inside a defined tolerance band and reproduce that band run after run. Repeatability, not peak performance, is what makes a climatic test worth running. A chamber that reaches −40 °C once proves very little. A chamber that reaches −40 °C within ±0.5 °C this month and again after 2,000 operating hours proves your product actually survives the cold. Most "failed" tests blamed on the sample trace back to the loop: a sensor sitting in a dead zone, a PID tuned on an empty chamber, a humidifier fighting a compressor that just cycled off. Fix the control architecture and the same hardware produces data you can defend in a design review. This tutorial lays out a five-step commissioning method —...
阅读全文

Environmental Test Equipment Quality Control from Design to Commissioning

Environmental Test Equipment Quality Control from Design to Commissioning Introduction Environmental test equipment plays a vital role in ensuring product reliability and performance across various industries. Quality control from design to commissioning is essential to meet stringent industry standards and customer expectations. This guide outlines the critical steps involved in implementing effective quality control measures for environmental test equipment, specifically focusing on the offerings from Suzhou Satake Engineering Co., Ltd. Relevant specifications and application guidance are available through Automotive Environmental Simulation Equipment . The company specializes in designing and constructing high-performance environmental test chambers, wind tunnels, and thermal testing equipment. With ISO 9001 and ISO 14001 certifications, Satake emphasizes quality management and environmental responsibility throughout the product lifecycle. This article will provide insights into...
阅读全文